loading rate是什么意思_loading rate怎么读_loading rate的音标、翻译、近义词

1、

Breakeven analysis and power load feature analysis are focused. It elaborates advantages and disadvantages of differential power price influencing power companies from such aspects as sold power quantity 、 market share 、 loading rate.

着重进行了盈亏分析、负荷特性分析，从售电量、市场占有率、负荷率等方面阐述了差别电价对电力公司的利弊。

互联网摘选

2、

The FEM calculation shows that with increasing loading rate, general yield load Pgy, stress and strain rate ahead of notches for the notched specimens increase.

有限元计算表明：缺口试样的整体屈服载荷Pgy，缺口前的应力，应变率均随加载速率的增加而增加。

互联网摘选

3、

The effect of loading rate, test temperature and pre-plastic deformation on hydrogen induced apparent yield stress reduction have been investigated.

研究了变形速度，试验温度以及预先塑性变形程度对氢致表观屈服强度下降的影响。

互联网摘选

4、

Research on Uniaxial Tension Test of Concrete under Ultra-Low Loading Rate

极慢速加荷混凝土轴向拉伸试验研究

互联网摘选

5、

In this paper, the distribution of biaxial bending strength and the influence of loading rate on fatigue strength in the biaxial bending test by use of soda-lime glass specimen with micro indentation crack are studied.

本文研究了带有微小压痕裂纹的钠钙玻璃试件在惰性环境中的双轴向弯曲强度分布和加载应力速率对试件疲劳强度的影响。

互联网摘选

6、

The analysis shows that when loading rate is slow the free water in crack may reach the tip and the wedge effect of water accelerates the expansion of the crack causing the reduction of concrete strength.

分析认为，慢速加载时，裂纹中的自由水可以达到缝尖，自由水的楔入作用加速了裂纹的扩展，降低了混凝土的强度；

互联网摘选

7、

Firstly analysis the effect of temperature, molar ratio of water and silicon, catalyst concentration and time on the loading rate of hydrolysis and condensation product of APTES on the surface of ultramarine pigment.

首先分析温度、水硅摩尔比、催化剂用量、时间对APTES水解缩合产物在群青颜料表面负载率的影响。

互联网摘选

8、

The experimental results prove that this method is able to save fuel up to 7% under more than 60% loading rate of the engine and evidently improve the operating stability within the range of above mentioned loads.

试验证明，这种方案可使负荷率为60%以上区间的最大节油率达7%，并能明显地改善发动机在这个负荷范围内的稳定性。

互联网摘选

9、

Loading rate and holding time are obtained by experiments.

通过试验获得了最佳的加载速率及保压时间。

互联网摘选

10、

Therefore, loading rate and cutting angle have significant influence on tear strength.

加载速率和割口角度对撕裂强度有显著影响。

互联网摘选

11、

Effect of loading rate on the tensile properties of pc/ abs

加载速率对PC/ABS拉伸性能的影响

互联网摘选

12、

Therefore, it is very important to analyze the AC motor loading rate testing error.

为此，分析交流电动机负载率测试误差具有重要的意义。

互联网摘选

13、

The first stress pulse on the back side of specimen is positive and it increases as the in-crease of loading rate from 5 to 40m/ s.

当冲击速率从5m/s增加到40m/s时，试样受压应力一侧第一应力脉冲为正应力，且不断增大。

互联网摘选

14、

Effects of temperature and loading rate on the flexural-tensile strength, strain and stiffness modulus of ATB-25 asphalt mixture were discussed using three-point bending test.

通过沥青稳定碎石基层ATB-25沥青混合料的三点弯曲试验，研究了温度及加载速率对弯拉强度、弯拉应变及弯曲劲度模量的影响规律。

互联网摘选

15、

Loading rate has significant effects on tearing strength.

加载速率较低时，其撕裂强度较小；

互联网摘选

16、

The Effect of Loading Rate on the Compressive and Tensile Strength of Rocks

加载速率对岩石抗压和抗拉强度的影响

互联网摘选

17、

Atomistic Simulation of the Influence of Temperature and Loading Rate on Dislocation Emission

温度和加载速率对位错发射影响的原子级模拟

互联网摘选

18、

Larger loading rate leads to larger inclination angle of shear band in the middle of specimen.

随着加载速率的增加，岩石中部剪切带的倾角有增大的趋势。

互联网摘选

19、

On The Deformation of Rivet Materials under Different Loading Rate

不同加载速率下铆钉材料变形研究

互联网摘选

20、

The performance of three-stage BAF system processing under different hydraulic loading rate, nitrified liquid reflux, temperature conditions was studied.

研究了进水负荷、硝化液回流、水温等工况条件下的三级BAF工艺的处理效能。

互联网摘选

21、

The sensitivities of temperature and loading rate of the material are low.

该材料对温度和加载速率的敏感性较小。

互联网摘选

22、

There is a fracture transition caused by loading rate. Through thermal activation analysis, a quantitative relationship was found.

通过热激活分析，获得了断裂激活能以及与温度和加载速率相关的定量化关系。

互联网摘选

23、

A quantitative relationship between dynamic fracture toughness and temperature and loading rate has been obtained through thermal activation analysis.

通过热激活分析，可以获得定量描述动态断裂韧性、温度及加载速率之间的关系。

互联网摘选

24、

The results illuminate that the sulfide removal rate and the sulfur production rate can arrive at 100% and 73% respectively when the sulfide volume loading rate, dissolved oxygen and the sulfide influent concentration are optimal.

结果表明，在一定的硫化物容积负荷、溶解氧和进水硫化物浓度下，硫化物的去除率能达到100%，单质硫生成率能达到73%以上。

互联网摘选

25、

Aerobic granular sludge demonstrates high activity and ability to withstand high COD loading rate.

好氧颗粒污泥具有在高负荷下良好的COD去除率。

互联网摘选

26、

Although the COD removal efficiency had not been improved greatly, the start-up period was shorten 25% and the highest organic loading rate was increased 40% and bigger anaerobic granular sludge was observed, when PACs were added into the USAB reactor.

结果显示：启动时间缩短了近1/3，最大有机负荷提高近40%且出现了更大颗粒污泥，但COD去除效率没有明显提高。

互联网摘选

27、

Impact of Temperature and Ammonia Loading Rate on Nitrification in BAF

温度及氨氮负荷对曝气生物滤池硝化作用的影响

互联网摘选

28、

Compared to the traditional IC Reactor, the start-up period of Additional Gas IC Reactor could be shorten by 20% and organic loading rate could be enhanced by 25%. In additional, it improved the sedimentation rate, activity and mechanical intensity of granular sludge.

附加气IC反应器比普通IC反应器在启动时间上缩短20%，容积负荷提高25%，培养出的颗粒污泥在沉降性、污泥活性、机械强度等方面均有较大程度的提高。

互联网摘选

29、

The terminal settling velocity was much greater than that of the liquid upflow, which successfully solved the problem of sludge wash-out under high organic loading rate ( OLR).

颗粒污泥的终端沉降速度远高于厌氧反应器中废水的上流速度，其良好的沉降性能解决了在高负荷情况下污泥的流失问题。

互联网摘选

30、

The hydraulic loading rate must be less than 3m3/ m2 · d.

进水负荷应小于3m3/m2·d。

互联网摘选